Adaptec 2100S Ultra3 Single Channel Driver

Posted on  by 

  1. Adaptec 2100S Ultra3 Single Channel Driver
  2. Adaptec 2100s Ultra 3 Single Channel Driver Download
  3. Adaptec 2100s Ultra 3 Single Channel Drivers

( 2 ) This card should (also) function with the Windows 7 or Windows 8 drivers available for download. These link to the download page for each driver. Note: Adaptec provides technical support for Adaptec products only. Adaptec does not provide technical support for non-released or beta versions of operating systems. All of these supported devices can be controlled from a single host adapter which in this case is the Adaptec 3010S Ultra3 Four Channel device. The device driver for this hardware component provides support for booting from a CD-ROM on all of its four SCSI channels. Adaptec SmartRAID adapters are full-featured, high-performance enterprise RAID adapters built for a variety of storage requirements. They have the industry's lowest power consumption and provide maximum read/write bandwidth and Input/Output Operations Per Second (IOPS) when coupled with 12 Gbps SSDs.

Printable version

HP ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Windows Server 2003

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Driver - Storage Controller
Version:6.4.645.100 (E)(18 Aug 2009)
Operating System(s): Microsoft Windows Server 2003
File name:cp011021.exe (582 KB)
The HP ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver is an OEM driver from Adaptec that contains HP ProLiant value-add features to support the HP ProLiant 66MHz/64bit Single and Dual Channel Wide Ultra3 SCSI Adapters.
Enhanced component-level logging has been implemented in the smart component installer. The generated log file will be located on the target system in %SYSTEMROOT%cpqsystemlog directory under the name CPQSETUP.LOG.

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

2a9c2adea5efae80e890a33731b6b2c9cp011021.exe

Installation:
The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

Download Alfatron electronic industries laptop and netbook drivers or install DriverPack Solution for automatic driver update. Download Download DriverPack Online. Windows XP, 7, 8, 8.1, 10 (x64, x86) Category: Laptops. Alfatron Electronics 2020. Legacy download files Legacy PROWIN32 and PROWIN64 download packages provide PROSet, driver, ANS, FCoE, and DCB support for Windows 7. and Windows Server 2008 R2. Regular webpacks provide Intel® PROSet support for operating systems Windows 8.1., Windows Server 2012., Windows Server 2012 R2., Windows® 10, Windows Server 2016., or newer. We value your privacy, which is why we inform you about cookies on our website. In this pop-up you can set your preferences regarding cookies. You can find an overview of all cookies on our cookies page. In our privacy statement you can read how we process your personal data. By clicking 'agree', you consent to all functional, analysis and tracking cookies. ALFATRON ELECTRONICS, INC. Corporate office. Address: 6837 Canoga Ave., Unit 9, Canoga Park, CA 91303 Main: Tel: +1(818)539-7882 Fax: +1(818)660-1098 Sales: +1(818) 296-9519 Support / Technical: +1(818) 539-7789 Accounts: +1(818)296-9538 Info@alfatronelectronics.com. Alfatron spa dn2500 driver download for windows.

From that drive and directory, execute the downloaded file.

Click the 'Install' button to proceed with the installation. The component will automatically be installed.

Archos 97 carbon driver download for windows 10. End User License Agreements:
Hewlett-Packard End User License Agreement

Version:6.4.645.100 (E) (18 Aug 2009)
Enhanced component-level logging has been implemented in the smart component installer. The generated log file will be located on the target system in %SYSTEMROOT%cpqsystemlog directory under the name CPQSETUP.LOG.

Version:6.4.645.100 (D) (30 Mar 2009)
The component installer has been updated to recognize if it is running within a virtualized guest environment.

Version:6.4.645.100 (C) (31 Mar 2008)

Updated cpqstub and cpqsetup.


Version:6.4.645.100(B) (13 Apr 2006)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Component installer was enhanced to leave the component XML file (cpxxxxxx.xml) in a known location (%SystemDrive%CPQSYSTEM) so the HP Management and Version Control agents can retrieve information about the installed components on the server.


Version:6.4.645.100 (17 Dec 2003)
Resolves issue with driver not entering/exiting hibernation state properly. This issue was seen when the controller was put into hibernation more than once.

Version:6.3.6300.100 (1 Jul 2003)
Added digital signature.

Updated INF file banner.


Type:Driver - Storage Controller
Version:6.4.645.100 (E)(18 Aug 2009)
Operating System(s):
Microsoft Windows Server 2003

Description

The HP ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver is an OEM driver from Adaptec that contains HP ProLiant value-add features to support the HP ProLiant 66MHz/64bit Single and Dual Channel Wide Ultra3 SCSI Adapters.

Enhancements

Enhanced component-level logging has been implemented in the smart component installer. The generated log file will be located on the target system in %SYSTEMROOT%cpqsystemlog directory under the name CPQSETUP.LOG.

Installation Instructions

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

2a9c2adea5efae80e890a33731b6b2c9cp011021.exe

Installation:
The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Click the 'Install' button to proceed with the installation. The component will automatically be installed.

Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement

Revision History

Version:6.4.645.100 (E) (18 Aug 2009)
Enhanced component-level logging has been implemented in the smart component installer. The generated log file will be located on the target system in %SYSTEMROOT%cpqsystemlog directory under the name CPQSETUP.LOG.

Version:6.4.645.100 (D) (30 Mar 2009)
The component installer has been updated to recognize if it is running within a virtualized guest environment.

Version:6.4.645.100 (C) (31 Mar 2008)

Updated cpqstub and cpqsetup.


Version:6.4.645.100(B) (13 Apr 2006)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Component installer was enhanced to leave the component XML file (cpxxxxxx.xml) in a known location (%SystemDrive%CPQSYSTEM) so the HP Management and Version Control agents can retrieve information about the installed components on the server.


Version:6.4.645.100 (17 Dec 2003)
Resolves issue with driver not entering/exiting hibernation state properly. This issue was seen when the controller was put into hibernation more than once.

Version:6.3.6300.100 (1 Jul 2003)
Added digital signature.

Updated INF file banner.


Adaptec SCSI RAID 2110S This 64-bit/66MHz PCI-to-SCSI RAID card is intended for entry-level SCSI servers and workstations. Allows for the connection of up to 15 SCSI devices running at up to 160 MByte/sec. Supports RAID levels 0, 1, 0/1, 5, 0/5, and JBOD. 32 MB cache memory is onboard.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

3ware:

Adaptec: (Adaptec support line (408) 934-7274 and (800) 416-8066)

Adaptec 2100S Ultra3 Single Channel Driver

Single

Adaptec / DPT: (Adaptec support line (408) 934-7274 and (800) 416-8066)

  • Adaptec / DPT PM2865U3 Ultra160 SCSI RAID Controller (1,2,3,4 channels)
  • Adaptec / DPT PM1564U3 Ultra160 SCSI RAID Controller (1,2,3,4 channels)

Adaptec / Dell: (Dell support line (800) 624-9896)

  • Adaptec AAC-364 / Dell PERC2/QC 4-Channel Ultra2 RAID Controller (Updated driver and Management software are available only for customers who bought the AAC-364 controller from us. If you are qualified, you can request by sending us an email)

AMI / LSI Logic:(LSI MegaRAID support line (678) 728-1250)

Compaq: (Compaq support line (800) 652-6672)

HP: (HP support line (970) 635-1000)

IBM: (IBM support line (800) 426-4968)

Channel

ICP Vortex / Intel: (Intel support line (800) 628-8686)

Intel: (Intel support line (800) 628-8686)

Interphase:

Iwill:

LSI Logic (LSI SDMS SCSI support line (719) 533-7230)
LSI Logic SCSI RAID Controller Cards

LSI Logic SCSI Controller Card

Adaptec 2100s Ultra 3 Single Channel Driver Download

LSI Logic SAS Controller Cards

Adaptec 2100s Ultra 3 Single Channel Drivers

LSI Logic SATA RAID Controller Cards

LSI Logic IDE RAID Controller Cards

Mylex / LSI Logic: (LSI AcceleRAID and eXtremeRAID support line (510) 608-2400)

Coments are closed