Linux USB Ethernet/RNDIS Gadget Driver Download For Windows 10

Posted on 29-03-2021 by admin

And i have a multi-functions usb gadget that supports ethernet over usb. Solution software for automatic driver download and linux usb ethernet rndis gadget driver for windows 7 32 bit, windows 7 64 bit, linux usb ethernet/rndis gadget - there are 7 drivers found for the selected device, which you can download from our website for free.
Linux usb ethernet rndis gadget driver for windows 7 32 bit, windows 7 64 bit, windows 10, 8, xp. Microsoft proprietary protocol used by many usb3. Such as usb rndis is a usb ethernet/rndis gadget. Linux usb host rndis gadget driver version 1.
The package provides the installation files for ACER USB Ethernet/RNDIS Driver version 1.1129.0.0. If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version.
Windows 7 (or 10) is unable to open the 192.168.123.123 with USB connection. It is possible that the USB Ethernet RNDIS Gadget driver is missing, see below picture.

DriverHelper.ps1 -Mode Sign -InfFile. Linux.inf; Install the driver; Open the device manager and locate the Raspberry Pi (usually under 'Ports (COM &LPT)'). Right click that device and select 'Update driver' Choose 'Browse my computer for driver software' and locate the directory of the.inf file.

Seeing a yellow warning icon next to RNDIS in Device Manager? Don’t worry… Although it’s incredibly frustrating, you’re definitely not the only person to experience this problem. Many Windows users have reported the very same issue. More importantly, you should be able to fix it pretty easily…

What is RNDIS?

RNDIS is short for “Remote Network Driver Interface Specification”. It is a Microsoft proprietary protocol, which is often used on top of USB. As a protocol, RNDIS provides a virtual Ethernet link to most versions of the Windows, Linux, Android and FreeBSD operating systems.

If a yellow warning icon appears next to it, it indicates that Windows has identified a problem with it. In most cases, this issue can be fixed after you reinstall or update its driver.

There are two methods to update RNDIS driver:

You can do it manually or automatically.

Method 1: Manually. Download alcatel one touch 8008d driver. You can update RNDIS driver manually in Device Manager. Here is how to do it:

On your keyboard, press the Windows logo key and R at the same time to open the Run dialog. Then type devmgmt.msc and press Enter.
In Device Manager, right-click on RNDIS, then click Update driver.
Select Search automatically for updated driver software.
Follow the on-screen instruction to continue.

If Windows find the updated RNDIS driver for you, follow its instruction to install it on your PC. If not, try the next fix, below.

Method 2: Automatically. If you don’t have the time, patience or computer skills to download and update RNDIS driver manually, or if Windows did find the updated driver for you, you can, instead, do it automatically with Driver Easy.You don’t need to know exactly what system your PC is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing. Driver Easy handles it all.

All the drivers in Driver Easy come straight from the manufacturer. They‘re all certified safe and secure.

Downloadand install Driver Easy.
Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.
Click Update next to Android USB Ethernet/RNDIS to automatically download the correct version of its driver, then you can install it manually. Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (This requires the Pro version – you’ll be prompted to upgrade when you click Update All. You get full support and a 30-day money back guarantee).
If you need assistance, please contact Driver Easy’s support team at support@drivereasy.com.

This application note explains how to configure the i.MX RT1050 as the USB Ethernet Gadget connected to the USB PC over the USB OTG High-Speed link.

The standard Linux Ethernet Gadget driver, with the CDC Ethernet support enabled, is used to implement this functionality. To provide support for Microsoft Windows USB hosts the gadget driver implements a second device configuration with 'Remote NDIS' (RNDIS) protocol supported.

In practical embedded applications, the Ethernet Gadget can be used for organizing TCP/IP-based communications with the i.MX RT1050 over the USB physical link.

Configuration and Build

To enable Ethernet Gadget functionality in the rootfs project, do the following:

Activate the cross development environment:

[yur@ubuntu linux-cortexm-2.5.0]$ . ACTIVATE.sh
[yur@ubuntu linux-cortexm-2.5.0]$ cd projects/rootfs
[yur@ubuntu rootfs]$

Select the appropriate USB Gadget in the Linux configuration menu (go to the Device Drivers -> USB support -> USB Gadget Support -> USB Gadget Drivers menu, and select the Ethernet Gadget (with CDC Ethernet support) variant):

[yur@ubuntu rootfs]$ make kmenuconfig

Build the project:

[yur@ubuntu rootfs]$ make

Run the resultant rootfs.uImage on the target. Observe the appropriate kernel messages indicating that the USB gadget is started:

..
using random self ethernet address
using random host ethernet address
usb0: HOST MAC 16:f2:10:f7:90:b7
usb0: MAC 4a:ef:b0:aa:d0:d4
using random self ethernet address
using random host ethernet address
..
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
g_ether gadget: g_ether ready
..
/ # ifconfig usb0
usb0 Link encap:Ethernet HWaddr 4A:EF:B0:AA:D0:D4
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:60 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

The MAC addresses used by default are generated by the driver randomly. You can set up fixed values by adding appropriate variables to the Linux kernel command line in U-Boot:

g_ether.host_addr=<value> (e.g. g_ether.host_addr=02:00:00:00:02:02) to specify the MAC address of the interface on the Host side;
g_ether.dev_addr=<value> (e.g. g_ether.dev_addr=04:00:00:00:04:04) to specify the MAC address of the interface on the Gadget side.

Connect to the Linux Host

If the host PC is running Linux, messages like these shown below will be displayed in the i.MX RT1050 console upon connection to the host:

g_ether gadget: high-speed config #1: CDC Ethernet (ECM)

The host PC will detect the i.MX RT1050 as a CDC Ethernet device:

[yur@ubuntu ~]$ dmesg | tail
[ 8089.518624] usb 1-1.4: new high-speed USB device number 7 using ehci-pci
[ 8089.613487] usb 1-1.4: New USB device found, idVendor=0525, idProduct=a4a2
[ 8089.613502] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8089.613509] usb 1-1.4: Product: RNDIS/Ethernet Gadget
[ 8089.613516] usb 1-1.4: Manufacturer: Linux 4.5.0-00428-g34d61b4a0ecd-dirty with 402e0000.usb
[ 8089.730616] cdc_subset: probe of 1-1.4:1.0 failed with error -22
[ 8089.732362] cdc_subset 1-1.4:1.1 usb0: register 'cdc_subset' at usb-0000:00:12.0-1.4, Linux Device, fa:19:ef:9b:12:0f
[yur@ubuntu ~]$ ifconfig usb0
usb0Link encap:Ethernet HWaddr fa:19:ef:9b:12:0f
inet6 addr: fe80::f819:efff:fe9b:120f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Connect to the Windows Host

The RNDIS/Ethernet Gadget driver installation procedure depends on the Windows OS version. Here are the instructions for different versions:

After the host driver installation is complete, the i.MX RT1050 will print the following information on the console:

g_ether gadget: high-speed config #2: RNDIS

TCT/IP Communications

Setup an IP address of the USB Ethernet interface on the USB Device (i.MX RT1050) side. Select an address that will not conflict with the other network sub nets in the system (if present):

/ # ifconfig usb0 192.168.2.2

Setup an IP address of the USB Ethernet interface on the USB host (PC) side (obviously, select the address from the same sub-net as the Gadget):

Linux host example:

[yur@ubuntu ~]$ sudo ifconfig usb0 192.168.2.1

Windows host example depends on the Windows OS version. Also make sure here that anti-virus/OS firewall services will not block the traffic over this interface.

Check communication between i.MX RT1050 and the host over USB with ping:

on i.MX RT1050:

/ # ping 192.168.2.1 -c 3
PING 192.168.2.1 (192.168.2.1): 56 data bytes
64 bytes from 192.168.2.1: seq=0 ttl=64 time=1.044 ms
64 bytes from 192.168.2.1: seq=1 ttl=64 time=0.559 ms
64 bytes from 192.168.2.1: seq=2 ttl=64 time=0.574 ms
^C
--- 192.168.2.1 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.559/0.725/1.044 ms

on PC:

[yur@ubuntu ~]$ ping 192.168.2.2-c 3
PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data.
64 bytes from 192.168.2.2: icmp_seq=1 ttl=64 time=0.504 ms
64 bytes from 192.168.2.2: icmp_seq=2 ttl=64 time=0.370 ms
64 bytes from 192.168.2.2: icmp_seq=3 ttl=64 time=0.360 ms
--- 192.168.2.2 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1998ms
rtt min/avg/max/mdev = 0.360/0.411/0.504/0.067 ms